Ohhhhh nooo, you don’t have the foundry anymore?

Leave a comment

We are proud to have a knowledgeable and curious clientele associated with our gallery. We have countless numbers of visitors returning to see our old foundry and reminiscing about their very memorable tours. Unfortunately, they are mildly disappointed to find out Rip sold the foundry several years ago. But, since there is such a fascination with the process of bronze casting we thought it would be nice to turn you on to some foundries in Oregon that also offer tours. Be sure to contact the foundries first to confirm the hours and other details. Tours may be scheduled, self directed and there may a charge.

To learn a little more about the fascinating work of the foundries, read our post on the lost wax casting process.

Parks Foundry
331 Golf Course Road
Enterprise, OR 97828
Phone: 541-426-4595

Parks Bronze foundry nestled in Wallowa County of Oregon and well established in this artisans community since 1986 as a full service bronze casting and molding foundry in response to fine arts sculptors, art collectors, art enhancement projects, and art appreciation.

Valley Bronze Gallery
18 S Main Street
Joseph, OR 97846

Located in the scenic art community of Joseph, our showroom displays sculptures by many artists whose bronze works are cast nearby at our foundry. The gallery also serves as the initial meeting place for tours of our foundry, which is located approximately 1/2-mile northwest of the gallery on Alder Street, west of Main. Joseph is a community that our artists enjoy visiting during their business trips to the foundry.

The Maiden Foundry
16600 S.E. 362nd
Sandy, OR 97055

The magnificence of this legendary metal has endured the ages, reflecting an Old World value for timeless quality. We are a foundry run by artists and we strive for that same tradition of excellence. We take pride in capturing the essence of the original creative concept.

Hot Lake Springs
66172 Hwy 203
La Grande, OR 97850

Following a short film, you will see a complete hands-on demonstration. After a time for questions and answers you will visit the Hot Lake Springs Bronze Casting Facility. There, you will observe our artisans at work on all stages of the bronze casting process. Allow yourself plenty of time. We would like you to experience bronze from beginning to end. Bring your camera and don’t be afraid to ask questions.


The art of lost wax casting

Leave a comment

It is somewhat a wonder that we still use a material that was discovered thousands of years ago. More astonishing, though, is that artisans and even industrialists, continue to use the lost wax method of bronze casting. This method of production is loved by artists, jewelers, and machinists because it maintains even the smallest detail. For you curious ones, here is a little more info about this fascinating process.

The Art of Lost Wax Casting

It’s not every millennium that you can create beautiful art work using a process that is thousands of years old, but lost wax casting happens to be one of those processes. A technical and somewhat lengthy process, contemporaries use the same steps as the artisans of 2000 BC.

The first step in the process is to carve the sculpture. An oil based clay is often used which will stay pliable and allow the artist to leave the piece for an indefinite amount of time. Most pieces are supported internally by armature which can be made of any number of materials—special foam, wire or even aluminum foil. The finished clay sculpture looks exactly as the artist intends, with all the details in their final form.

The next step is to make a mold of the original, out of which the bronze will be cast. The clay sculpture is divided into sections and silicon rubber is poured over each section creating a soft layer. This layer is then encased in plaster making it rigid and in turn more stable. Referred to as the “mother mold”, it is now the exact negative of the original sculpture. Molds are generally two sided, so when both sides are complete, the mold is opened and the original clay sculpture is removed. This mold will be used repeatedly, unless it is a limited edition, at which point it will be destroyed once the full edition has been cast.

The mother mold is now ready to receive the molten wax. The melted wax is poured on the inside of the mother mold and rotated to create a uniform layer.  This step is repeated using a cooler layer each time, until the desired thickness is reached, usually about 1⁄8 inch. This dimension also determines the wall thickness of the final bronze. The wax liner is now an exact copy of the original. Once it is removed from the mold, the wax is then “chased” using a heated metal tool, which will help smooth out any unwanted marks or seams. The wax now looks like the finished piece.

A wax, tree-like structure, known as gating, is then created by attaching “paths” and a “cup” to various spots on the wax model. The gating provides open pathways for molten bronze to flow and will be removed later in the process.

After the gating is complete, the wax model is dipped alternately into slurry, then into a silica sand material, allowing the piece to dry in between. The process repeated until the shell is least a ½ inch thick. This is repeated as many as ten times and can take weeks to complete. The bigger the piece, the thicker the shell needs to be. Once dry, the piece is then placed in a kiln to harden the coating, and melt the wax. What remains is the negative space, formerly occupied by the wax, hence the term “lost wax casting”. When the shell is cool, water is poured through to expose any cracks or leaks and then patched if necessary.  After this it is finally time to pour the bronze.

The bronze alloy is melted in a vessel known as the crucible, and then poured through the cup into the heated shell. The pouring process takes place very quickly and requires a team of several people.  The bronze cools rapidly and may be handled as soon as one hour after pouring. The investment (the hard shell mold) is then broken open, revealing the final bronze. At this point the gating is removed. The piece is sandblasted to remove any residue from the investment; pits are filled and the piece is chased to remove the seam, welding and other marks. It is worked on in this manner until it looks exactly like the original sculpture. From there patinas are applied and the sculpture is finished.

In a future post we will talk about patinas and caring for your bronze sculpture.